WINDOWS-95
PIONEER ATAPI MINI DRIVER FOR THE DRU-A124X ATAPI CD-ROM DRIVE

--------------------------------------------------------------------
First of all rem out the ATAPI_CD.SYS line from CONFIG.SYS
Also rem out the MSCDEX.EXE line from AUTOEXEC.BAT
Windows-95 does not require these and in fact they can prevent the
new atapi mini driver from working at all.

Also Windows-95 appears to like its CD-ROM drives attached to the
E/IDE secondary port if available.
--------------------------------------------------------------------

To Install use the following instructions:

1.  Select "MY COMPUTER"
2.  Select "CONTROL PALEL"
3.  Select "ADD NEW HARDWARE"

4.  This wizard will help ...........................

    Select [NEXT]

5.  If your hardware is already installed ...........

    Select [*] NO
    Select [NEXT]

6.  Select 'Hard Disk Controllers'
    Select [NEXT]

7.  Click Manufacturer ..............................

    Select [HAVE DISK]
    Put ATAPI Driver disk in a:\
    Select [OK]
 
8.  Models

      'Atapi Miniport Driver'

    Select [NEXT]

9.  Windows can continue installing .................

    Select [FINISH]

10. {Remove Flopy from Drive A:}

    To finish up your new hardware, you .............

    Do you want to restart your computer

    Select [YES]

The installation is now complete and when Windows-95 has re-started
you should find the CD-ROM icon.

----------------------------------------------------------------------------
In some isolated cases the new driver after being installed does not work.
The main cause can be that previous CD-ROM drivers are still resident or
being loaded. One remidy is to re-install windows-95 and when asked if
a CD-ROM is present DON't check the box and continue as if it is a first
installation. This should purge the system of any residual CD-ROM drivers.
If doing this from a CD-ROM version of Win-95, you would have had to have
the original ATAPI_CD.SYS and MSCDEX.EXE loaded. Make sure to rem or remove
these before installing the new Win-95 atapi mini drivers. Using the original
drivers Atapi_cd.Sys and Mscdex.Exe you can get the DRU-A124X to work by
disabling 32 Bit mode. This will allow Win-95 to be re-installed from within
itself.
-----------------------------------------------------------------------------

If you have any problems, contact Pioneer Technical Support
(03) 9586-6326